T8 8ft LED Tube/Bulb - 48w/40w/36w/32w Wattage Adjustable, 130lm/w, 3000k/4000k/5000k/6500k CCT Changeable, Frosted, FA8 Single Pin, Double End Power - Ballast Bypass
T8 8ft LED Tube/Bulb - 48w/40w/36w/32w Wattage Adjustable, 130lm/w, 3000k/4000k/5000k/6500k CCT Changeable, Frosted, FA8 Single Pin, Double End Power - Ballast Bypass
1-Pack
- Regular price
- CAD 49,695.00
- Sale price
- CAD 33.13
40W T8 Tube Light - 5600 Lumens - Replace 140W Fluorescent - FA8 Base Single Pin - 4000K - Frosted - 8ft LED Bulb - Led Shop Lights
Choose our FA8 LED Tube Lights in 8ft which have 40W and available in 4000K color temperature. This led tube produces up to CRI of >80 and delivers up to 5600 lumens. It is an excellent substitute for T8, T10 & T12 fluorescent tubes. This 40W can safely and easily replace a fluorescent tube of 140W and bring an energy-savings of 100W. Thus, a lower utility bill for you every month. These Double-Ended Power 140W LED tubes will work without a ballast, hence the existing ballast must be bypassed and directly wired to the line source for the tube fixture to work. Our Frosted 40W LED tubes are housed in rugged die-cast aluminum for efficient heat dissipation. To illuminate from ceiling height, our LED tubes having a beam angle of 120 degrees to emit enough bright light. Our LED tubes have a long lifespan and have a shatterproof coating. LED Tube from LEDMyplace is they are ETL & DLC listed when these listings make you eligible for a handsome rebate along with 5 years of warranty.
140
Watt Replacement
5600
Lumens
50,000
Hours
120°
Beam Angle
100-277
Volt
Features T8 8ft 40W LED Tube, 5600 Lumens Single Pin, 4000K Frosted:
- Available Wattage: 40W
- Color Temperature: 4000K
- Luminous Efficacy: 130-140 Lm/W
- Beam Angle: 120 degree
- Wattage Equivalent: 140W
- Lifespan - 50,000 hours
- Ballast Bypass [Works without a ballast]
- Voltage: 100V - 277V
- ETL, DLC, CE & RoHS approved
- 5 years of Manufacturer's Warranty
Ballast Bypass
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Flicker-Free
8ft LED tube, one of the jaw-dropping features of LED tubes is that they don’t flicker unlike what you would have definitely observed in the case of fluorescent tubes. The LED tubes start instantly and once they start, they don’t flicker and produce a humming sound.
IP22 Rated
The LED tubes that are either clear or frosted have an IP22 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of a size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there are moisture. E.g. Bathrooms, kitchens, etc.
Voltage Input
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don’t have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to bypass the ballasts once in the total lifetime of LED tubes.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5 years if the tubes are operated upon for 24 hours a day.
CRI >80
The CRI is greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
120 Degree Beam Angle
This tube has a 120 -degree ultra-wide beam angle that is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 120 -degree beam angle.
Energy Saving
Our LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume a lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that’s a pretty good reason as to why the LED tubes don’t warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
LED Chip
These led tubes come with premium quality LED Chips inside. 8ft LED tube has a high-quality standalone chip: SMD LED, which made from any number of chips to ensure high performance and reliability.
Specifications
| Base Type: | FA8 |
| Brand: | LEDMyPlace |
| Color Rendering Index(CRI): | >80 CRI |
| Dimensions (L x W x H): | 93.81 x 1.15 x 1.32 |
| DLC Listed: | Yes |
| Housing: | Aluminum + PC |
| LED Type: | 2835 |
| Light Distribution: | 130-140 Lm/W |
| MPN (Part No.): | TB059 |
| Replaces: | 140 Watt Replacement |
| Voltage: | 100-277 Volt |
| Wattage: | 40 Watt |
| Beam Angle: | 120° Beam Angle |
| Certifications: | ETL, DLC, CE, RoHS Listed |
| Color Temperature (Kelvin): | 4000 Kelvin |
| Dimmable: | No |
| DLC Model no.: | WEN-T8-40P8FT-FA8-F(4000K) |
| IP Rating: | IP22 Rated |
| Life Hours: | 50,000 Hours |
| Lumens: | 5600 Lumens |
| Operating Temprature: | -68 To +122 °F |
| SKU: | WEN-8FT-FA8-4000K-F |
| Warranty: | 5 Years |
Product Review
Questions & Answers
Have a Question?
Be the first to ask a question about this.
